Core Definition
A sacrificial anode is a metallic anode designed based on the galvaniccell electrochemical theory. It corrodes and consumes itself preferentially, rendering the protected structure a cathode to avoid corrosion. Common sacrificialanode materials include magnesium, zinc and aluminum alloys. They are suitable for scenarios with low protectioncurrent demand or lowsoilresistivity environments, and are widely applied to ships, steel sluice gates, buried pipelines and other facilities.
The sacrificialanode method is a selfgeneratedcurrent cathodicprotection technology. Metals or alloys with lower potential are electrically connected to the protected metallic pipeline. Both are immersed in surrounding electrolytes (soil or water), forming a macroscopic galvanic cell. The anode material continuously corrodes and dissolves, releasing electrons that flow toward the pipeline and protect the pipeline against corrosion.
Working Principle
The sacrificialanode protection method adopts more reducible metals as anodes, which connect with protected pipelines to build galvanic cells. Within such galvanic cells, anode metals are continuously consumed via oxidation reactions while pipelines are protected as cathodes.
From the electrochemical perspective, sacrificialanode cathodic protection supplies electrons to protected metals, putting the whole protected metal in an electronexcess state. The potential of every spot on the metal surface drops to the same negative value. No potential difference exists among surface points, so metal atoms lose no electrons and corrosion is inhibited. Simply put, anode materials (magnesium, zinc, aluminum) are chemically more active than iron. Once connected to steel pipelines, they corrode themselves voluntarily, and the resulting electric current protects pipelines. The anode “sacrifices” itself for pipeline protection — this is where its name originates. When sacrificial anodes are fully corroded, replacement with new anodes can resume protection, and pipelines remain intact throughout service.
Requirements for Anode Materials
Properties of sacrificialanode materials determine anticorrosion performance. Basic requirements are specified as follows:
First, sufficiently negative and stable potential. A sufficiently large opencircuit potential difference shall exist between anode material and protected metal, so as to provide adequate driving voltage for the cathodicprotection system, output sufficient protective current and overcome loop resistance.
Second, low polarizability. Low polarizability means the potential does not shift significantly toward positive values during operation, enabling stable current output. Excessively high polarizability causes rapid positive shift of anode working potential, subsequent drop of driving voltage and severe deterioration of protection performance.
Third, high current efficiency. Current efficiency refers to the percentage ratio of actual electric capacity to theoretical electric capacity. Not all current generated during anode consumption protects pipelines; part is wasted by selfcorrosion of the anode itself. Higher current efficiency means more anode consumption converts into protective current and brings longer service life.
Besides, anode materials shall dissolve uniformly; their corrosion products shall be nontoxic, environmentally friendly, readily available and costeffective.
Selection of Three Anode Materials
Magnesiumalloy anodes are mostly used in soil environments; zincalloy and aluminumalloy anodes are commonly adopted in seawater.
Magnesiumalloy anodes deliver the highest driving voltage, with opencircuit potential ranging from −1.5 V to −1.7 V (vs. coppercopper sulfate reference electrode). They apply to highresistivity soil and freshwater environments. Nevertheless, their current efficiency is relatively low (around 50 %), accompanied by high selfcorrosion rate. They get consumed too rapidly in seawater. Moreover, excessive driving voltage may introduce hydrogenembrittlement risk from overprotection for highstrength steel components.
Zincalloy anodes feature opencircuit potential of approximately −1.05 V and relatively low driving voltage. They exhibit stable performance with low risk of overprotection and hydrogen embrittlement. According to GB/T 49502021 Sacrificial anode of zinc alloy, zinc anodes apply to media with resistivity below 15 Ω·m, including seawater, sea mud and lowresistivity soil. Their current efficiency reaches 65 %70 %, supporting long service life.
Aluminumalloy anodes have opencircuit potential of about −1.10 V and high electriccapacity per unit weight. Their current efficiency exceeds 80 % in seawater, making them the preferred material for marine environments. However, aluminum alloys tend to passivate and fail in soil, so they are generally not recommended for soil service conditions.
Relevant Standards
GB/T 49502021 Sacrificial anode of zinc alloy specifies classification, types, dimensions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage for zincalloy sacrificial anodes. It applies to cathodic protection of steel structures in media with resistivity below 15 Ω·m.
GB/T 49482025 Sacrificial anode of aluminum alloy is applicable to cathodicprotection for ships, port and offshoreengineering facilities, seawater coolingwater systems, storage tanks, pipelines and other industrial steelworks exposed to corrosive media such as seawater, brackishwater (resistivity ≤ 500 Ω·cm), sea mud and seabed gravels.
PracticalEngineering Installation Notes
In practical projects, supporting measures shall be taken for sacrificialanode installation. Anodes buried in soil shall be surrounded by conductive chemical backfill consisting of 75 % Gypsum, 20 % bentonite and 5 % sodium sulfate by mass. Such backfill reduces anodetoground resistance and stabilizes current output.
For grouped installation, anodetoanode spacing shall be no less than 3 m, and the soil cover thickness above anodes shall be at least 0.6 m. After installation, anode consumption status and potential of protected structures shall be inspected periodically to guarantee sustained protection effectiveness.
